The Iguazu is one of the larger water features that Flexinox offer. It has a massive 35m3/hr flow rate which is enough water to make quite an impression!.
This is named after a very large water fall and when you see this one in action you will know why.
The unique feature of these is they are available with a special chemical sutface treatments that cracks the surface of the stainless steel. Or in a Blue stainless – again achieved with a secret chemical process. These are not for everyones budget but really make a creative statement. Which could be perfect if you are searching for an iconic water feature for a new Wellness suit. If you like these then why not check out the brand ne FX range that have built in electronic flow controllers and LED’s.
This water feature comes complete with anchor.
Please Note: For illustration purposes the image shown is the Polish Iguazu.
The special finish Iguazu water features can take up to 12 weeks to manufacture – the standard polished versions are available in 3 weeks.
To see the size of each fitting either download the full brochure from the Resources Tab above or simple change the images.
Please call us if you have any questions when planning your water feature installation. It is worth remembering that all our water features have different flow rates – therefore will require some prior thought and planning. For example the Bali water curtain has a maximum flow of 30m3/hr. This flow rate is double the flow rate of most domestic swimming pools! Which means the Bali will need its own 3 HP pump system and more importantly 2 designated drains within the swimming pool that are the correct size and distance apart. You can see a typical close coupled installation in the images above.
The next thing to consider is how you would like to turn the water feature on? Various water side switching options are available. Some with auto cut off timers.
The final and most important point to consider is how will you keep the water safe in the water features ‘Dead leg’? We would always recommend that you install a purge timer that switches on the water feature for a couple of times each week for at least 3-5 minutes. That way chlorinated water will pass through the feature on a regular basis. There are some cheap and simple methods that can be used.
If you would like a system that can be connected to your existing inlets then please call us for advice. We are always happy to help.
Please ask if you have any questions before ordering, alternatively download the full product pdf which details sizes etc - see Resources tab.
If you need help planning your water feature or would like a few ideas please download our Water Feature Review
Product Guides and Technical Drawings Available to Download .