The Maui Water Curtain is a very popular feature. It can be mounted just under pool edge or at higher level. Care needs to be taken when installing the Maui that the curtain is level and that the opening has not been squashed during installation
The various sizes and flow rates means lots of flexibility. For example the 300mm unit can be plumbed into a return line and the flow rate required is only 10 metres cubed per hour.
Please Note: For illustration purposes the image shown is the Maui 300mm
The exterior of the Maui has not be polished, which means it is not really designed to be exposed. These are usually cast in concrete or similar. They can be boxed in to good effect. Simply connect your water supply to the 2†female thread at the base of the unit.
To see the size of each fitting either download the full brochure from the Resources Tab above or simple change the images.
Please call us if you have any questions when planning your water feature installation. It is worth remembering that all our water features have different flow rates, therefore will require some prior thought and planning. For example the 1000mm Maui water curtain has a maximum flow of 30m3/hr. This flow rate is double the flow rate of most domestic swimming pools! Which means the Mai could need its own 3 HP pump system and more importantly 2 or 3 designated drains within the swimming pool that are the correct size and distance apart. You can see a typical close coupled installation in the images above.
The next thing to consider is how you would like to turn the water feature on? Various water side switching options are available. Some with auto cut off timers.
The final and most important point to consider is how will you keep the water safe in the water features 'Dead leg'? We would always recommend that you install a purge timer that switches on the water feature for a couple of times each week for at least 3-5 minutes. That way chlorinated water will pass through the feature on a regular basis. There are some cheap and simple methods that can be used.
If you would like a system that can be connected to your existing inlets then please call us for advice. We are always happy to help.
Please ask if you have any questions before ordering, alternatively download the full product pdf which details sizes etc - see Resources tab.
If you need help planning your water feature or would like a few ideas please download our Water Feature Review
Features:
Product Guides and Technical Drawings Available to Download .